House Pictures Chat Corner - Show off your house pictures!

  • Erstellt am 2015-11-25 10:27:31

matte

2019-12-18 10:36:01
  • #1
I installed the plinth lighting myself, using Philips Hue. I just had the kitchen fitter install a power strip in the plinth area. Fortunately, we also have a robot vacuum, so the basic cleanliness increases significantly. I'm glad about the lighting and don't see any reason not to do it because of the dust. Here, you can relatively easily remove the skirting boards to get to the wiring. In the end, it was no effort, cheaper than from the kitchen fitter, and also integrable into KNX. If you can somehow get power down there, I’d recommend it to you.
 

Maria16

2019-12-18 10:40:31
  • #2


If you are building new, it should basically be irrelevant where you have a line installed. It is true that the follow-up costs for a stove are higher because of a hood or downdraft; but I don't see such price hikes for the sink. Regardless, I would ALWAYS try to have one (or several) sockets on the island so that you can also plug in a kitchen appliance there.
 

Climbee

2019-12-18 10:43:20
  • #3
We have power under the island, so it should not be a problem to implement it on the island. The baseboards are also only clicked onto the legs of the cabinets with us.

Whether you even need a light on the other kitchen row, I don't know. But that should also be feasible. I'll ask my dear husband and show him your picture.
 

ludwig88sta

2019-12-18 10:43:54
  • #4


I plan to install a vented extractor hood, so the island solution is almost unnecessary. But yes, then having the sink on the island is something to seriously consider!?

In general, one should not be stingy with sockets when building new. We ourselves plan to install at least one above every windowsill (right now in the Christmas season, your decorations will thank you).
 

pffreestyler

2019-12-18 12:30:10
  • #5
Exhaust air also works without problems with an island. Two of my neighbors have it with zero problems. You just don't have a core drill - it goes over the roof. Probably even the better energy solution.
 

ludwig88sta

2019-12-18 12:45:46
  • #6
why should it be energetically better?

But I won’t find a shorter way for the exhaust air than through the wall from the outside wall side.
 

Similar topics
22.11.20151 year ventilation system, clarity, facts, electricity costs36
04.05.2016Ventilation system - what to do if the room is planned to be repurposed?10
01.03.2017Controlled residential ventilation and extractor hood exhaust10
03.10.2016Exhaust air and supply air one above the other?22
27.01.2017Exhaust air vs. recirculated air in a controlled residential ventilation system32
13.02.2017Number of supply and exhaust airflows in residential ventilation11
24.03.2017Is the ventilation system connected incorrectly?13
05.05.2017Central Controlled Residential Ventilation: Supply and Exhaust Air, Door Bottom Gap30
19.01.2018Controlled residential ventilation system - decision support31
09.01.2018Exhaust air in the bedroom - supply air in the storage room24
06.06.2018Automation of a controlled residential ventilation system (ventilation system)32
03.03.2019Sewage smell / Ventilation system16
17.02.2020Open kitchen: exhaust or recirculation in controlled residential ventilation & KfW5540
18.04.2021KfW 55 - Ventilation system yes/no? - Experiences222
15.10.2020Controlled residential ventilation: positioning of supply and exhaust air in my designs44
27.02.2021Controlled residential ventilation + fireplace + kitchen exhaust, does it work?56
08.04.2021Ventilation system in single-family house without effect = planning error?87
23.06.2021Controlled residential ventilation - Planning the positions for supply air / exhaust air60
30.06.2021Extractor hood with exhaust air at KfW5527
20.12.2022Bathroom fan, pure exhaust with humidity sensor wanted11

Oben