Construction of a 144 sqm bungalow in Fichtenwalde (near Potsdam)

The ceiling will be made with drywall. 11 cm thick drywall, the panels will be laid on top. The external construction supervisor said to pay attention to ventilation. The attic was not done beforehand, so that no mold develops (that was the information).

The attic is only intended for storage, no rooms will be created there.

Thank you for the info - That sounds good, then you also need to worry less about airtightness, the foil will then be glued to the plaster on the side. So studwork with substructure. That is good for ventilation system and cables and everything you don't want to see for lighting etc.

Thank you for the info - That sounds good, then you also have to worry less about airtightness, the foil will then be glued to the plaster on the side. So studwork with substructure. That is good for ventilation systems and cables and everything you don't want to see for lighting etc.

Here is the construction according to the performance specification. Drywall will come in about 2 weeks.

I'm currently at the construction site to take some photos for the architect who will probably take over the overall planning.

Here are some photos from all sides.

Anhydrite was poured today. Tomorrow I will get the instruction for the construction dryer :cool:

So much for everything running smoothly :-)

Today received a call from the construction company. Chemicals that enable quick drying were not mixed into the anhydrite by Knauf. Therefore, the floor can only be walked on tomorrow and the drying time takes 2 weeks longer. On the one hand, good, fewer chemicals, on the other hand bad because of the 2 weeks longer drying time. He also apologized for the 6cm extra drywall on the ceiling, he did not inform the planner about it. As long as it stays with these two things, it’s still not so bad :-)

I have received one more piece of information. The anhydrite is dried via the underfloor heating. This is done with the help of a heating cartridge.