Air-water heat pump current consumption and data

  • Erstellt am 2020-09-29 11:06:43

Zaba12

2021-01-13 22:08:55
  • #1

No, I have never had any faults until now. The only thing I had at the beginning of December was that the underfloor heating had a pressure loss. An inexplicable 20 liters had to be refilled. No idea where they went.

I'll put it this way, I don't know what to make of the numbers after the heat pump has been running so poorly in the last few weeks. halmi has noticed it too.

15.6 kWh in 2 hours. Now off again after 2 hours as the return flow target + 2K has been reached.

EDIT: Now hot water has started with 2.5 kW.
[ATTACH alt="D7BA37E6-2F0B-449A-B2FB-FC1E45805884.jpeg" type="full"]56102[/ATTACH][ATTACH alt="B3B15989-FABC-4D25-B5C7-4A1E77DC1958.jpeg" type="full"]56103[/ATTACH][ATTACH alt="669CE000-87D1-43BB-A54B-39B52F2AFE7B.jpeg" type="full"]56104[/ATTACH]
 

Bookstar

2021-01-13 22:25:29
  • #2
We currently have the same AT, the same supply temperature, but a return temperature of 28 degrees and a return setpoint of 27 degrees. It's strange that we have to run a 3-degree higher RT setpoint for the same room temperatures. I can only explain this by the low volume flow. Can you please read from the efficiency pump what volume flow the system is running? Ours always shows about 800 liters per hour there.
 

halmi

2021-01-13 22:29:26
  • #3
Have you ever seen your flow rate during defrosting?

Ours always modulates around 600l/h. During defrosting, the flow rate is about 1100-1200l/h. The system has been running continuously since 12/24.
 

Zaba12

2021-01-13 22:34:43
  • #4
It only says that in there

 

Bookstar

2021-01-13 22:41:27
  • #5
Thank you, I will compare the values tomorrow. No, I will check the flow rate during defrosting tomorrow.

strange, it looks a bit different for me. But thanks!
 

halmi

2021-01-13 23:02:40
  • #6
Here for comparison when defrosting, it can really only be due to the flow in your case.
 

Similar topics
27.01.2020Properly setting the air-to-water heat pump with underfloor heating54
11.10.2021Actuators are open but no flow13
25.04.2023Heat pump LWZ 403 Sol high supply + return in solar thermal. Underfloor heating is malfunctioning...13

Oben