Floor plan design single-family house with around 150 m²

  • Erstellt am 2018-02-12 18:09:21

ypg

2018-04-10 14:33:15
  • #1


Up to 2 meters wide, it is possible to have two sashes without a mullion... something with a stub? I've forgotten the technical term.

With fixed glass, you can't clean the roller shutters later.
 

11ant

2018-04-10 14:42:57
  • #2
That's an argument. Typical man, I would have forgotten.

Flush sashes don't help much here, we're talking about about 6 cm less pin in the eye compared to the width with a central post. Flush sashes are used for patio doors or emergency exit windows.
 

chrisw81

2018-04-10 14:48:13
  • #3
Edit to the previous post: Alternatively, the window could also be increased to 2 m wide (but then with double sashes), so that it does not look like 2 narrow "arrow slits"..
 

chrisw81

2018-04-10 14:50:39
  • #4

Why not just single-leaf (fixed glazing) then? Since we have venetian blinds there anyway, cleaning wouldn’t be a problem. I just wonder if it doesn’t look too modern, as you mostly see such large fixed glazing on modern, cubic houses rather than on gable roof houses?
 

11ant

2018-04-10 15:21:38
  • #5
Fixed glazing in this width is of course also possible in one piece. Naturally, fixed glazing also fits with a gable roof. However, what you mean by "Schießscharten" is not clear to me: 14:11 is definitely a landscape format, and even with a mullion in the middle, it never looks like arrow slits.
 

chrisw81

2018-04-10 17:19:55
  • #6
Yes, maybe that was a bit exaggerated, but double-leaf only looks good from a certain width in my opinion, otherwise you just have a lot of frame and very little glass area. 1.76 is certainly possible, more is definitely better. Per leaf, that would be a ratio of 88 : 1.385 (just divided by 2).
 

Similar topics
26.03.20152m wide terrace door without a central post recommended, warranty?14
14.12.2020Fixed glazing vs. turn/tilt41
27.02.2017Window variants: Stulp vs. mullion15
17.01.2023Fixed glazing plastic window is leaking45

Oben