Dishwasher fronts

  • Erstellt am 2014-03-26 11:26:41

IKEA-Experte

2014-11-06 19:19:39
  • #1
Only this much can be said:
80 cm high fronts fit on a device with a variable hinge.
There is a report about the successful installation of a BSH XXL device using the Stefan method and about the use of Behjälplig.
For a BSH device with regular height, it depends on a trial with the Stefan method; if it does not work, BEHJÄPLIG should work.
When using BEHJÄLPLIG, the door is fixed at the bottom so that it can only move around one pivot axis there. It is mounted on the door by means of two sliders that move on a rail attached to the door.
 

lalalisa

2014-11-07 09:01:54
  • #2
Great, that already helps me a lot and thanks to your explanation I have now also understood how BEHJÄLPLIG works.

Thank you very much and have a nice weekend!
 

vienna01

2014-11-12 16:39:32
  • #3
I have now measured several BSH dishwashers: the maximum allowable overhang of the front panel BELOW the dishwasher door is 80mm. Actually, more would be possible, but then the panel would hit this "return cable," which seems to be responsible for raising the door. At 80mm, it may be necessary to bevel the front panel slightly on the INSIDE where the cables are located. How this behaves with an existing plinth could not be tested due to the lack of a plinth - but it should not be a problem either.
 

lepole

2014-11-13 11:50:49
  • #4
Hello everyone,
I ordered my kitchen Bodbyn this week but without electrical appliances.
Now I still need a dishwasher and an oven.
I didn’t want a dishwasher from Ikea because acquaintances had bad experiences with them.
The salesperson pointed out to me that other appliances rarely fit the fronts.
We want a 3-part front so that the look is maintained.
Do you happen to know brand appliances like Siemens/Bosch/Neff that can be installed there without problems?
60 width and with A Fully integrated.
I have seen that there are two types of hinges. One where the front detaches at the bottom part and the variant where the front stays attached (in my opinion the nicer one).

Thanks a lot for the info!

Regards
lepole
 

IKEA-Experte

2014-11-13 13:57:19
  • #5
Siemens SX878D04PE: Thanks to the variably adjustable hinge, there are no issues with the front height of 80 cm and it has A.
 

lepole

2014-11-13 15:12:32
  • #6
Thank you IKEA expert for the quick response.
Tell me, is the machine new? I can't find it online anywhere.

Best regards
Lepole
 

Similar topics
13.10.2017IKEA kitchen quality and experiences?140
15.02.2017Fully integrated dishwasher19
20.08.2015Storage shelf with door and drawer Inreda/IKEA, need help11
31.08.2012Which kitchen appliances from Ikea?17
26.05.2015Ikea METOD / Dishwasher19
19.01.2015IKEA Outstanding Dishwasher Disappointment18
06.09.2014Siemens or Bosch dishwasher combined with Behälping rail14
24.10.2016Ikea Metod + BEHJÄLPLIG + Bosch Grundstück = Problem22
22.11.2016Installing Siemens dishwasher in Ikea Metod kitchen58
26.03.2015XXL dishwasher from Neff12
18.10.2015First Ikea kitchen... Now with backsplash (p. 7)61
24.06.2015IKEA METOD kitchen with Siemens dishwasher25
26.05.2015Problems with BEHJÄLPLIG10
31.10.2015Install Bosch SMV68M90EU dishwasher in Ikea Metod23
07.01.2016The new kitchen will be from Ikea14
16.05.2016Our new first Ikea kitchen - planning and preparation69
12.05.2016First IKEA kitchen planning and some questions (external appliances)16
21.09.2016Questions about Bosch SMV GSP in Ikea Metod kitchen unit11
21.09.2018New kitchen - dishwasher from Ikea or another manufacturer?27
30.01.2017Ikea Metod cabinet for built-in Bosch refrigerator HND22K20011

Oben