Dishwasher fronts

Hello everyone,

I have read through the thread from start to finish, first of all thank you very much for the useful tips and hints

Today we ordered our kitchen including delivery / installation. We need a new dishwasher. I understood that I can use the dishwasher SBE68TX06E from Bosch, since it is an XXL device with VarioHinge and yes, also on the list a few pages earlier.

Also thanks for the video about mounting the front [MEDIA=YouTube]HM0kKEKzn6o[/MEDIA] - we have planned VOXTORP fronts without handles. I am less skilled at DIY and had hoped that if the device fits, the front would also be installed here.

Today at the order unfortunately I heard that the installation service will not install the front. What are your experiences here? Not even for a tip

Many thanks in advance for any advice, also experiences regarding the mounting of the front

-aero

A quick question for everyone who has already installed their fully integrated BSH dishwashers: Was the drilling template for attaching the front parts to the dishwasher included for you? I have the Neff GX660 and apparently there is no template included, although it appears in the manual... I definitely had to reorder it from BSH...

Hello everyone, first post and I hope I’m doing everything right . I have already read through your posts over the past weeks, but I still have a question: For my new Ikea kitchen (planned but not yet ordered) I want to use a 45 cm narrow, fully integrated dishwasher. I assumed that there is no XXL third-party appliance in narrow size suitable for Metod. Today I just searched again and now I wonder if this one might work?: Siemens SR76T095EU, the title says "with Varioscharnier". The height is given as 815 mm, but under "Downloads" and there under the point "Masszeichnungen" it is actually clear that the device can be adjusted to a height of 875 mm, or am I mistaken? Thanks in advance for your assessment!!

Hello, how high you can adjust the feet is not so important. The maximum front height is 750 mm. So you can only use this dishwasher if you mount the front with a 5 cm overhang and fill 5 cm between the countertop and the appliance, e.g. with wood.

Aha, I understand, so that was the mistake in thinking....too bad!

Today I installed a Bosch XXL dishwasher without a variobracket, with a front 2x 60x40cm with a blanket as a handle. I also mounted a strip of about 2.5 cm at the top, which is not visible when standing in front of it. (The countertop still protrudes a bit)

The decorative panels in the corner are still missing.