Hello,
I need to briefly revive the thread once again.
I currently have ambiguous measurements for our patio doors.
The raw construction dimension is 2.265 m. As I understand it, this is quite standard because full bricks can then be installed. The patio doors are also large enough for comfortable passage for tall people (for example, I am 1.95 m).
Our BU also offered patio doors in the quote: 1800 x 2200.
Since we will be procuring the windows and all doors ourselves, I obtained my own quote, provided the measurements, and attached the floor plan with the raw construction details.
Two variants were now offered. One is 1800 x 2200 for the lift-and-slide door and then 1800 x 2040 for a normal patio door with a rebate.
I cannot quite understand the 1800 x 2040. Isn’t that too small?
The entire structure will most likely be as follows:
10 cm perimeter insulation
20 cm tax consultant slab
14 cm rigid foam insulation
17 x 2 mm underfloor heating pipe
WLG 045 insulation - height not yet known
6 cm cement screed
This is still estimated, as no calculation is available yet.
A height of 2.04 m seems a bit too little to me, right? The raw construction ceiling height is 2.75 m.
I hope this is not described in too confusing a way.
PS: Does the forum have problems with Tapatalk? I can’t log in here in the forum with the app - because I don’t have permission?!