Empty conduits on the property - ideas? - It's not too late yet :)

So friends, the lawn is sown, the main lawn area with 3x MP3000 and 1x MP2000 run in a circle on the outside water tap (1/2“) and Gardena hose adapter (for now, later a larger 3/4“ tap from the utility room will be connected to the system. Unfortunately, the rotators do not have enough pressure or water volume to reach the full spray range, is there anything that can be done about it? MP3000 can manage about 6m and MP2000 only 4-5m. Already considered doing without the Gardena water hose connection (plastic nozzle), then more should flow through, right? I have now laid another supply line to a rotator under the flower bed, so that in case of emergency I can supply 2 rotators separately later, in case the 3/4“ tap is not enough for the 4 rotators. So currently we have to switch plugs and water additionally with a hose. I first ordered such a Gardena distributor so I don't have to keep switching all the time.

Outdoor faucet does not work. The pressure is too low. You have to drive off directly from the house connection.

Pressure is not the problem but the amount of water. The solution is to reduce the circuits or use a different water source.

The outdoor water tap doesn't work. The pressure is too low. You have to go directly from the house connection

Yes, as I said, I have provided a separate connection in the utility room, but it still needs to be installed.
Then I'll have to make do with that for now.

Morning! Which irrigation controller can you recommend? I currently have the Hunter Wifi on my radar for 300,- (12 zones). I had the Opensprinkler in mind before, but when I compare it to the Hunter Wifi, I end up at the same price since the Hunter already includes the power supply (big plus). The Appstore apps both look "OK". Have I missed something important?

If you don't have home automation, use Hydrawise. We run it at 3 locations. Simple and reliable.