grericht
2020-09-19 07:44:17
- #1
Hello,
the exterior plastering on our house will be done soon, and I finally have to deal with the topic of the door intercom system. After several hours of research, I am rather confused. Maybe I can gather a few tips here.
I am especially running into limits with the following "requirements":
I would like the door opener not to be wired directly in the system/outside but, for example, in the house connection room in the basement. I don’t feel comfortable knowing that any layperson can open the unlocked door at the door intercom.
Here are the current "facts"
the exterior plastering on our house will be done soon, and I finally have to deal with the topic of the door intercom system. After several hours of research, I am rather confused. Maybe I can gather a few tips here.
I am especially running into limits with the following "requirements":
I would like the door opener not to be wired directly in the system/outside but, for example, in the house connection room in the basement. I don’t feel comfortable knowing that any layperson can open the unlocked door at the door intercom.
Here are the current "facts"
[*]During the electrical rough installation, I laid a Cat7 LAN cable to the door – but it can also be replaced/supplemented with any bus cable.
[*]I exclude WLAN. I am now considering whether bus, LAN, or DECT. It should be connected to a FritzBox 7590.
[*]An electric door opener is available – it should be connected "securely" (in the basement?).
[*]A camera is desirable but it points directly to a public area and is next to the door. So it must either be installed with an angle bracket or have a large detection area.
[*]I don’t need monitors. There will be a Fritzphone on every floor anyway. They are to be used for answering. Video can also be transmitted there.
[*]I need/want the option to answer the door call via mobile from outside and open the door (for possible package deliveries). Preferably then with video transmission, so via app. Maybe a keypad at the bell would also be possible. I want to be able to change the code at any time.
[*]The door intercom system should be expandable with IP cameras (this would be especially important if no camera is installed).