Wow, so many posts :oops: I was only away for 2 hours :D
So, I’ll try to sort it out and evaluate it for myself:
Basically, I like the idea of placing the bathtub under the sloping roof because the limited height due to the slope above the tub doesn’t bother you. The knee wall is also quite high at 1.57m – a platform could possibly give the room some structure here and bring the tub into focus without the height being a problem – a platform height of about 15 - 20 cm is certainly sufficient.
The bathtub is supposed to have a little distance from the wall on both sides due to its design and stand with its back against the pre-wall or the knee wall. Therefore, your suggestion, , is unfortunately not an option.
By the way, the slope of the roof is 45°.
Without a door I always get cold – keyword steam column. There are such nice glass showers that are easy to clean. An open glass wall at the bottom just splashes water directly in front of the door and when you go in you have to squeeze past 140 cm of glass with your shoulder...? That would be too tight for me.
Regarding getting cold in the shower if there is no door, we actually have no experience and haven’t really thought about it... Could that really be a problem? Then a smaller shower (e.g. 90 x 100 or 90 x 120) including a door would certainly be more sensible. I don’t quite understand the pushing past part :)
We also briefly considered the shower under the sloping roof but then discarded it because we couldn’t use the space behind the door sensibly otherwise.
If you place the shower as drawn in the top left, you could still install a towel radiator on the wall at the “exit.”
By the way, the window opens to the “left,” I updated that in the latest plan.
The easiest way to accommodate the toilet would presumably also be at the knee wall, since the cistern and the connection to the waste pipe can be implemented most easily here. Alternatively, I can create a projection on the wall at the top of the plan.
Thanks a lot for the great contributions!!
Moritz
