Small kitchen - help needed with arrangement

Why did you design the corner for a future 110 cm SbS? I only know of 120 cm SbS, e.g. from Liebherr. 110 cm is not a known and common kitchen dimension. Can the corner at least be expanded accordingly? Since you already have such thoughts?

Now looking from the door as well as from the dining area, only two wall cabinets in standard size, the one at the back is not easily accessible. Tall cabinets are now 200 cm high, the range hood is 90 cm wide. 3-meter wall: 1 x 30, 1 x 60, 1 x 40, 1 x 60, 1 x 40, then comes the window section with a width of 3 x 60, then the island with one leg of 60 cm. The rest can be done by :)

Thank you very, very much, Yvonne! That is ultimately graphically represented what was loosely swirling around in my head.

Two things are on my mind, namely wall cabinets between the extraction hood and window yes/no and island yes/no. Presumably, there would still be enough space without either, but the room would appear less cluttered.


I had found one from AEG with 109 cm. We would still be a bit flexible at that point. I actually thought there were more models with 100 or 110 cm than I was able to quickly find just now.

Wall cabinets: without them always looks very stylish, but bending down for every glass? Nooooo :)

I would rather backtrack to a smaller freestanding fridge. The most beautiful side-by-side is useless if you don't have enough space to enjoy it. Even in the currently planned kitchen, you don't have a proper view of it.

I would like to have, if possible, exact measurements of the walls marked with arrows. Or did I overlook them? If applicable, a plan of the entire floor plan would also be interesting, as it would give a better overall picture.

Hello Neige,

starting from the top left: 1.31.5 m to the window; then 1.76 m the window, then follows an approx. 3 m long wall section, a floor-to-ceiling window 1.76 m wide and another approx. 60 cm wall to the end of the house.

Below starting from the left wall: 1.13 m wall, then 0.885 m passage/sliding door; 25 cm in full wall thickness of 17.5 cm and the niche is 1.12.5 m wide with wall thickness of 6 cm.

I hope I described it understandably, I have to draw it neatly and dimensioned sometime.

Best regards!

Edit: I have attached the ground floor, although the floor plan is no longer 100% accurate. 12.50 m house length is still correct, but the wall between the study and the kitchen is not at 3.51 m, but already at 3.01 m. We moved it in favor of the kitchen. The window is, as said, 1.76 m and not 2.01 m. Position and dimension of the window on the wall in the living area is also no longer correct. Otherwise, the floor plan at least still gives an idea of the room layout as well as house width/length.