Ikea Skinande dishwasher in Metod kitchen

  • Erstellt am 2015-10-12 11:01:00

JonasHe

2015-10-12 11:01:00
  • #1
Hello everyone,

I recently assembled an Ikea kitchen myself and unfortunately still have the following unresolved problem:

I have not managed to integrate my Skinande dishwasher into the Metod kitchen. When I assembled the machine according to the instructions, there is always a gap between the top of the machine and the edge of the paneling. Therefore, I finally screwed the rail differently to the paneling manually so that the edge now fits exactly, but the paneling falls out of the rail when I open the door completely.

Since I no longer really know what to do, I wanted to ask if you know how this machine is correctly installed: Is it perhaps even correct that there is a gap between the top of the machine and the upper edge of the paneling (which would also mean that the countertop does not rest on the machine). If that is the case: Do I then put hard styrofoam or wood or something else between so that my countertop is supported? I bought a solid stone countertop separately, which is quite heavy and definitely needs to be supported on the surface of the dishwasher.

I would really appreciate your help,

Best regards, Jonas
 

IKEA-Experte

2015-10-12 12:02:42
  • #2
Hello,
the dishwasher never supports the countertop. If the appliance is at the end of a row, a support panel must be installed next to the dishwasher.
Did you recently buy SKINANDE?
A picture is worth a thousand words.
 

JonasHe

2015-10-12 14:16:52
  • #3
I bought the machine about 3 weeks ago. Does that mean the gap between the ceiling of the machine and the end of the casing is intentional?

How large should this gap be and can I line it with hard Styrofoam so that the panel still rests? - Installing a support wall would be a lot of effort since I can only attach it to the wall behind (and not the floor) and I don't expect the wall to be able to support the entire weight of the panel - I will try to add pictures later.
 

IKEA-Experte

2015-10-12 17:16:04
  • #4
A separate support side panel is required. Did you click the crossbar on top? Instructions p. 7, step 3: ikea.com/de/de/assembly_instructions/skinande-geschirrspuler-integr-__AA-1402800-1
 

Similar topics
20.02.2014IKEA kitchens - quality, price, and experiences?27
27.05.2016Feedback on the Ikea kitchen167
13.10.2017IKEA kitchen quality and experiences?140
14.09.2012Rumor: Will the Ikea Faktum kitchen be replaced next year?32
02.07.2009New Ikea kitchen - Recommendations which one?10
04.05.2011Ikea kitchen planning - various questions13
09.04.2014Difference between Ikea Faktum & Ikea Metod kitchen16
22.11.2016Installing Siemens dishwasher in Ikea Metod kitchen58
18.10.2015First Ikea kitchen... Now with backsplash (p. 7)61
24.06.2015IKEA METOD kitchen with Siemens dishwasher25
30.04.2015How are IKEA METOD kitchen cabinets delivered?12
05.10.2015Ikea Faktum repurchase service and plan new/old kitchen10
20.10.2015IKEA Metod Kitchen - Ideas / Suggestions for Planning?29
07.01.2016The new kitchen will be from Ikea14
16.05.2016Our new first Ikea kitchen - planning and preparation69
13.07.2016Ikea Metod Bodbyn feedback wanted27
21.09.2018New kitchen - dishwasher from Ikea or another manufacturer?27
24.10.2016After moving: botched IKEA kitchen in the apartment14
28.09.2018New IKEA kitchen - Questions before assembly - Are replacement parts in stock?15
08.05.2022IKEA Metod kitchen quality 2022: Quality and price, experiences?35

Oben