The building authority rejects the building application because the house is planned too far back

  • Erstellt am 2020-09-29 11:44:49

dynaudio79

2021-01-30 11:32:12
  • #1
In the meantime, quite some time has passed and construction has slowly begun.

The next step was the confirmation of the masonry drawings by the planner.
Even from a brief look during work, I saw that something was wrong.
In the evening, then with some calm and a beer, I had to realize that the walls in the bathroom upstairs had been shifted and the wall thickness had also changed.
Then I went into more detail and ultimately found that the floor plans for the building application were incorrect back then. Specifically, the chimney from the ground floor to the upper floor is not correct.
She apparently noticed this now and simply moved walls without pointing it out. I thought I was losing it. Additionally, the wall between the shower and the children's room was thickened from 17.5 to 24. Must have eaten too much Christmas goose.

Since the shower was precisely planned in advance and took a lot of time to use certain tiles without cutting them, I had to save the situation again and move the walls so that it fits again. The bathroom naturally became smaller as a result. That was clear.

The consistent thread doesn’t break....
 

nordanney

2021-01-30 11:48:02
  • #2
Then I'll keep my fingers crossed that it actually works. Because in construction, there is no delicate work. A deviation of one centimeter is practically a perfect score.
 

dynaudio79

2021-01-30 11:56:40
  • #3
I know that and it is of course also calculated. Since you do not address the actual topic, I assume it seems normal that they change floor plans? Uh, by the way, we're talking about 18cm that I then had to correct again. So it would be a 120cm tile and an 18cm one next to it. Visually really very valuable....
 

icandoit

2021-01-30 11:57:00
  • #4
Deviations from the building application are normal. Even for structural reasons, deviations can occur. Checking plans is the task of the client. Take your time for it. Best without beer. Then report the defects in writing. Have the plans changed and only approve them when everything is OK.
 

nordanney

2021-01-30 12:06:01
  • #5
Yes, it can be normal within the scope of planning. However, it is not normal to discuss and coordinate this with the client.
 

Pinkiponk

2021-01-30 12:16:56
  • #6

Is there a missing "not" in the sentence or is it meant as written? Thanks. :)
 

Similar topics
20.02.2014damp walls at terrace doors and front door11
19.11.2013Walls made of Styrodur or Styrofoam?10
27.03.2014What must be considered when removing or relocating walls?10
12.06.2014Walls of a new single-family house, ground floor runs crooked, defect correction construction defect19
28.06.2015Tile walls before floors?11
27.09.20153D images and floor plan of a single-family house18
04.01.2017Plaster walls in new construction or use fleece?16
02.08.2017Costs for interior finishing: flooring, walls, ceilings24
06.04.2018Floor plan change - Load-bearing walls in the apartment. What to do?14
18.07.2018Garage construction made of concrete! 3 walls or house extension? What do you think?26
28.12.2018On which of these floor plans can we continue to build?287
17.12.2018What is set in stone in the building permit application?10
01.02.2019Walk-in shower, please advise27
29.07.2019Replaster/re-clad walls (with photos)12
27.11.2020Myth?! "Breathing Walls" What is the truth?54
21.08.2021Walls painter fleece / ceiling lime paint?22
19.04.2017Electroosmosis to renovate damp walls11
07.08.2025Which shelf in the shower in the new building57
10.09.2021Plaster Q2 walls with roll plaster or other recommendation?27
06.04.2023Tile patterns on bathroom walls26

Oben