s25a
2016-04-27 09:01:41
- #1
Hello everyone,
I am new here and actually a big Ikea fan. I have just assembled my second kitchen and overall everything went well. However, I now need to make two changes and since I can’t find any information about this on the Ikea site, I wanted to ask if anyone here can help me.
1) Dishwasher. Currently installed is a Skinande dishwasher. However, this is going back immediately due to the noise level and quality of workmanship. Luckily, Ikea is very accommodating about that. Alternatively, I would like to install this appliance (Siemens SX66P052EU). The dishwasher is a bit taller than usual (86.5 cm), but that should actually work with my working height (countertop starts at 89 cm). Do you have to watch out for anything special regarding the front panel, or is it similar to the Skinande with the corresponding drillings and screws in the front?
2) Freezer. Another freezer will be added to the kitchen, which is to be integrated into a Metod tall cabinet. I already have the tall cabinet, but haven’t assembled it yet. I would now order the freezer but am not sure about the dimensions. Ikea built-in appliances are all about 54x54 cm (width, depth), but this one (Bosch GIN81AC30) has niche dimensions (H x W x D): 177.5 cm x 56.0 cm x 55.0 cm. Does anyone know if that will work? These things are quite heavy and I want to avoid having to send anything back.
One more note: I installed a Siemens oven in a tall cabinet. Actually, the dimensions didn’t fit. The oven collided with the drawer underneath. I then had to drill my own holes to fasten the oven. It was all quite complicated but ultimately worked.
Best regards and thanks
S
I am new here and actually a big Ikea fan. I have just assembled my second kitchen and overall everything went well. However, I now need to make two changes and since I can’t find any information about this on the Ikea site, I wanted to ask if anyone here can help me.
1) Dishwasher. Currently installed is a Skinande dishwasher. However, this is going back immediately due to the noise level and quality of workmanship. Luckily, Ikea is very accommodating about that. Alternatively, I would like to install this appliance (Siemens SX66P052EU). The dishwasher is a bit taller than usual (86.5 cm), but that should actually work with my working height (countertop starts at 89 cm). Do you have to watch out for anything special regarding the front panel, or is it similar to the Skinande with the corresponding drillings and screws in the front?
2) Freezer. Another freezer will be added to the kitchen, which is to be integrated into a Metod tall cabinet. I already have the tall cabinet, but haven’t assembled it yet. I would now order the freezer but am not sure about the dimensions. Ikea built-in appliances are all about 54x54 cm (width, depth), but this one (Bosch GIN81AC30) has niche dimensions (H x W x D): 177.5 cm x 56.0 cm x 55.0 cm. Does anyone know if that will work? These things are quite heavy and I want to avoid having to send anything back.
One more note: I installed a Siemens oven in a tall cabinet. Actually, the dimensions didn’t fit. The oven collided with the drawer underneath. I then had to drill my own holes to fasten the oven. It was all quite complicated but ultimately worked.
Best regards and thanks
S