Is IKEA FA707 compatible with other doors?

Hello In my Ikea kitchen plan, I want to include built-in cabinets that are 233cm high. In such a 233cm tall cabinet, I also want to install a fridge/freezer combination with a height of 180cm. As I understood it, the freezer part requires a 57cm door and the fridge part a 125cm door. Unfortunately, I have not found a 233cm cabinet with such doors at Ikea, see also here: Now I have done some calculations: The FA707 has 57/90/70 doors (from top to bottom), totaling 217cm. I would need 35/125/57 which also totals 217cm. Question: Is it possible to mount 35/125/57 doors on the FA707 and if so, do I have to buy the FA707 with the 57/90/70 doors and then additionally a 35cm and a 125cm door, or can I buy the FA707 carcass without doors and the doors separately? Regards Section Chief

Hi,

it's quite simple. Go to the seller and order a tall cabinet 217 for oven/fridge units. Then get the doors in your required dimensions. One package of standard hinges, possibly with soft-close, and two packages of fridge hinges. You only need these if your fridge combo has overlay hinges. If the device’s doors are mounted directly, of course, they are not needed. Then add plinth legs or freestanding legs and handles and possibly side panels, etc. Done. The price will be given to you then.

The carcasses don’t care what goes on the front. So you can mix however you like. Whether it fits in the end is another matter. In your case it should not be a problem. Just to be sure, the cabinet doesn’t really care what goes inside either. However, I have had a case where, due to the construction of a front-foreign device, there were problems with opening and closing the doors; please check with the manufacturer first if any information is known.

NfU

Na.

Thank you, I have now also found the 217 cabinet at Ikea...

Best regards
Section Chief