Excerpt Installation at the front or back of the cabinet

Hello,

I am currently having my kitchen installed by a carpenter.

He mounted the Utdrag extractor fan at the front inside the cabinet so that the closed extractor fan aligns flush with the cabinet door. At the back, there is therefore a hole up to the wall, and to turn on the light, I have to pull out the extractor every time.

In the kitchen of an acquaintance, the extractor is mounted at the back inside the cabinet and, for aesthetic reasons, it is always pulled out a bit forward up to the height of the door. Only when it is fully pulled out does the extractor start, but at least this way you can access the control panel.

What is the correct way?

Thank you in advance for your help!!!!

Hello,

take a look at the assembly instructions on p. 34f., it is explained quite clearly there. Mount flush with the back edge of the carcass at the rear (not in a way that blocks the ventilation), then adjust the stops so that the pull-out aligns flush with the front when inserted.
Regards,
IKEA-Freund

Thank you :)