Correct sink choice for base cabinet (160 cm)

The integrated ones have the disadvantage that in this case you also have to take the base cabinet from HA... And unfortunately, they only come in a maximum width of 140 cm – whether as one large single basin or two singles.

Why do you have to do that? You can buy and install the sink and base cabinet yourself.

At least with our HA, this is not possible due to warranty reasons. Sinks must be taken from the HA. And since integrated sinks can only be installed with a base cabinet, we would also have to take the base cabinet from the HA in this case.

Then have a few sinks installed for 50 euros, you even get a credit. ;) I would never think of having the builder install the Villeroy & Boch. But with the 1.6m you are right. That is a special size and accordingly quite expensive. Unfortunately, I cannot post the link to my result. You can find something like that for under 1000 euros.

I would never think of having the Villeroy & Boch installed by the house builder.

I don’t understand that. Why not? If the extra charge from the house builder is 300 euros per sink and the same sink costs 220 euros new on the internet, I’d rather have it installed directly by the house builder. Advantages: - I don’t have to tear the sink out of the wall afterwards and possibly damage the tiles - Warranty all from one source

I don't understand that. Why not? If the surcharge at the HA is 300 euros per washbasin and the same washbasin costs 220 euros new on the internet, I'd rather have it installed directly by the HA. Advantages: - I don't have to tear a washbasin out of the wall afterward and possibly damage the tiles - Warranty all from one source

Well, the surcharge is 300. But if you were to remove it at the HA, they would probably credit you for the standard washbasin? So the difference is significantly higher.

No, because that is not possible. I cannot remove the sink at the [HA]. The [HA] insists on installing a sink - for warranty reasons.