Under-sink cabinet

2021-04-22 08:06:52

There is no connection between the washbasin and the cabinet underneath. So basically, everything always fits, the only question is how tightly you can put them together and whether you like the visual impression.

But practically: If you already have the drawing of the washbasin, take the drawing of your cabinet as well and see if and how they can be combined. There is no technical trick as to what has to fit together. Look at the point where the cabinet touches the washbasin. Ideally, the deep cutout should fit into the cabinet. Then check where the siphon runs and whether that fits with the drawers.

2021-04-22 09:18:54

There is no connection whatsoever between the washbasin and the base cabinet. So basically everything always fits, it's just a question of how tightly you can put them together and whether you then like the visual impression. But very practically: if you already have the drawing of the washbasin, take the drawing of your base cabinet as well and see if and how they can be combined. There is no technical trick regarding what has to fit together. Look at the point where the cabinet touches the washbasin. Ideally, the deep cutout should fit into the cabinet. Then you check where the siphon runs and whether it fits with the drawers.

Okay, thanks. I was told at the bathroom studio that some manufacturers don’t like it if you then get the cabinets from somewhere “else.” Hmm, I’ll take a look at the dimensions then.

2021-04-22 09:27:58

Be creative.

We have decommissioned the sink; for that money, I could have bought 2.
The holes in the wall remain, so make sure you have a mounting option..

And this is how I solved it.

The base cabinet has a crossbar made of wood at the back, I drilled through this and screwed it. I only added the brackets additionally.

2021-04-22 09:38:00

Be creative.

We discarded the washbasin; I could have bought two for that money. The holes in the wall remain, or rather, make sure you have a mounting option..

And this is how I solved it.

The base cabinet has a crossbar made of wood at the back, which I drilled through and screwed. I only added the brackets additionally.

[ATTACH alt="IMG_20210422_092528.jpg"]60464[/ATTACH]

[ATTACH alt="IMG_20210422_092612.jpg"]60463[/ATTACH]

okay, have you also built with Town & Country? I somehow see no reason to understand it. We’ll take a closer look.

It was just confusing to hear so many opinions from many people.

2021-04-22 09:47:37

I honestly do not understand your problem. The holes are standard distances, and it is no secret that the GUs always make their things way too long. So either return it at Bauhaus or Ikea or go to a specialist store.

You want a washbasin with a base cabinet, so give Town & Country frame conditions.

If there is a pre-wall, then a wooden board must be installed behind it or threaded holes in a frame for the washbasin.

2021-04-22 10:09:56

I should take more time when writing... What I put together there is really terrible.

Similar topics
11.03.2018	Optimization of Angle Bungalow 108 by Town & Country	21
10.07.2019	Town & Country - Rotex Heat Pump	12
20.08.2018	Town & Country Flair Floor Plan Changes	24

Under-sink cabinet

Meyer37

Chris1990

tomtom79

Chris1990

tomtom79

tomtom79