Wooden steps on concrete stairs?

We basically have the exact same staircase as Otus, but completely enclosed in walls.

Since the carpenter wanted utopian prices, we simply did the cladding in folding structure design ourselves.

For those interested:

You work from bottom to top and always place an inverted "L" glued with lamella connectors onto three thick Spax screws (two at the front of the tread, one in the middle at the back), on which you can directly align the step using a spirit level. Once the step fits, we sprayed it with frame foam so that nothing would sound hollow later or "bounce" on the screws. Then it went on with the next inverted "L".
Finally, the staircase was minimally sanded and lightly oiled.

Material: Either from the carpenter or, like us, walnut worktops from OBI on offer, used cutting service for tread and riser steps. At home, the lamella "holders" were milled.

Altogether, with foam, screws, and wood, the entire cladding cost 589 EUR (the worktops were on offer ).

I can gladly provide pictures if needed.

Can gladly provide pictures if needed.

yes of course, please bring them on

Here is a small interim report of our EG-OG

What is under the stairs?

What is under the stairs?

A small storage space under the stairs, accessible from the utility room located behind it.

We basically have exactly the same staircase as Otus, but completely enclosed in walls.

Since the carpenter wanted outrageous prices, we simply did the covering in folding pattern ourselves.

For those interested:

You work from bottom to top and always place an inverted "L", glued with lamella connectors, onto three thick Spax screws (two at the front of the tread, one centered at the back), on which you can directly align the step with a level. If the step fits, we sprayed it with frame foam so that nothing sounds hollow later or “bounces” on the screws. Then you continue with the next inverted "L".
Finally, the staircase was minimally sanded and lightly oiled.

Material: Either from the carpenter or, like us, from OBI, walnut countertops on offer, used cutting service for treads and risers. At home, the lamella "holders" were milled out.

Altogether, including foam, screws, and wood, the entire covering cost 589 EUR (countertops were on sale )

I can gladly provide pictures if needed.

Are there pictures of the finished condition? What thickness of covering did you have?

in case someone, like or me, is looking for pictures:

https://www.hausbau-forum.de/threads/Haus-bilderthread-zeigt-her-eure-hausbilder.14011/page-1099#post-340789