Siemens GSP front problem

Hello Ikea fans,

I am currently building a kitchen and am stuck with the installation of the fully integrated dishwasher Siemens SN65M037EU.
It has to be installed at the edge of the kitchen, so I have to attach a side panel, which will surely be possible somehow. But the front panel is the problem.

I was at Ikea again and they pushed the Behjälplig thing on me. Now I read in the installation manual that you have to go through the door with 2x2 screws, but my dishwasher only has one continuous hole per side at the front :( plus 2 larger openings at the bottom for some kind of hanging mechanism. I find that very strange and have no idea what to do. Are you really supposed to use only the 2 screws now? Or does Behjälplig not fit at all?

Thank you very much in advance
Mausis

Hello,
you must attach BEHJÄLPLIG to the dishwasher according to the installation instructions from Siemens.

Unfortunately, that is not possible. The Siemens manual states that the front door must be fixed with 2 screws per side hooked in at the bottom. However, the BEHJÄLPLIG side "boards" are too short for the hanging openings. However, I did find a second pair of screw holes on the dishwasher door, but they are positioned at the top. I can screw the BEHJÄLPLIG side boards on there, but not at the top and bottom, rather at the top and middle. Is that stable enough?

In the Siemens manual, there are 3 screws per side, right?

Oh yes, that's true. According to the instructions, 3 per side. But the front only has 2 holes per side *scratches head*
Increases my worries even more :)

Just for your information: The mentioned dishwasher can be fully integrated with BEHJÄLPLIG.