Need help with compiling

Hello dear craftsman professionals,

I have to repurchase something for my Faktum kitchen and can only do it online..
Therefore, I need some help from you.
It would be very kind if you could tell me what I need for the assembly.

I am buying a base cabinet carcass for a cooktop. The cabinet size is 80x70.
With that, the legs.
Now about the doors..
In 80x70 there are only pull-out fronts left.. what do I need for a pull-out front?? Which drawers? Which hinges? And what is a stove panel?
Do I need NYTTIG the separation for the cooktop?
If I alternatively take 2 doors in 40x57, I could have a drawer in 80x13 at the top, but is that allowed if I want to install an induction cooktop above, meaning a drawer under the cooktop?

The next element would be a tall cabinet carcass in 60x195 (with legs it is 60x211) for a built-in oven.
What do I need for that (besides legs, shelves, etc.)
What are panels?
And can I install any standard built-in oven there or does it have to be from Ikea?
Your KARAMELLA

Thanks for your HELP!! I wish you a nice day.

Hello,

firstly, two questions.

Which front model do you have?
What should be below and above the oven (drawers, wire baskets, installation height of the oven)?

No device has to be from IKEA.

Hi IKEA expert,

since we took over the kitchen, we don’t know which fronts they are. It has a smooth surface (not high gloss! in off-white). I want to replace all the fronts anyway and choose APPLAD in white. So the fronts will be APPLAD white. Does anything change if the fronts were different?

Above the oven I am taking a door measuring 60x57, behind it there should only be a shelf, and below the oven a door with 60x70 where there should also only be a shelf. For the stove, I just don’t know if I am allowed to install a drawer underneath?! One more question: if I choose an 80 cm hob, will the cabinet with 80 cm width be enough or should it be 90 cm wide?

Thanks