garfunkel
2018-03-21 15:03:36
- #1
I have a renovated old building and want or wanted to install one myself. The stove builder immediately advised me to choose one with low power, otherwise overheating could occur. What you can do to find out beforehand is to place an electric heater with similar power in the corner of the fireplace and run it at power level 1, 2, or 3 for a few hours. Then you get an impression of how it will roughly behave.
I borrowed a 5kw electric heater for this, had to tap into a heavy-duty power cable for it. When it runs at full power for a longer time, it gets quite warm quickly in my case. It was in a room of about 55m².
It is better then to leave the door open to the rest of the living area. It will probably be similar to .
But for me, it is mainly about lying in front of the fireplace for 1 or 2 hours in the evening or reading the newspaper by the crackling fire. As a heating replacement per se, it was not intended for me.
With KFW 55 and lower, I see it more as a problem than enjoyment with such a stove. It depends on the premises.
I borrowed a 5kw electric heater for this, had to tap into a heavy-duty power cable for it. When it runs at full power for a longer time, it gets quite warm quickly in my case. It was in a room of about 55m².
It is better then to leave the door open to the rest of the living area. It will probably be similar to .
But for me, it is mainly about lying in front of the fireplace for 1 or 2 hours in the evening or reading the newspaper by the crackling fire. As a heating replacement per se, it was not intended for me.
With KFW 55 and lower, I see it more as a problem than enjoyment with such a stove. It depends on the premises.