HELP! Looking for a 145 niche for a Beko refrigerator

Good day,

I am currently planning our new kitchen and would like to install a fridge-freezer combination (NOT from Ikea). It is 144cm high and has two doors (fridge at the bottom, freezer at the top). BEKO RBI 6302. I am desperately looking for a solution, Metod cabinets all have different dimensions. The fridge should be installed either in a 148cm high cabinet with two doors or in a 208cm high cabinet with two doors and a drawer underneath. The door dimensions are: 1015 mm bottom and 333 mm top.

Any ideas???

Thanks in advance!!!
Paul

Hello,
it does not fit in the 140 cm cabinet, so it has to be the 200 cm one.
For the freezer door, you need a 40 cm high door, for the refrigerator door a 120 cm high one. That leaves 40 cm remaining. A 40 cm high drawer at the bottom would mean the freezer compartment is very high up, so there should be a 20 cm high drawer underneath. That leaves 20 cm at the top. A drawer there is not practical, nor is converting the drawer front into a door ideal, so instead of a 40 cm door for the freezer compartment, it makes sense to take a 60 cm one. The space above the freezer compartment is then only accessible when the freezer compartment is also opened.

So the suggestion is: 20 cm drawer, 120 cm refrigerator door, 60 cm freezer door.

The base for the BEKO must be mounted so that approximately the center between the doors lies in the gap of the cabinet doors.

With sufficient height, a 30 cm drawer at the bottom and a 10 cm panel at the very top would also be possible.

Thank you IKEA expert for the quick response! Then I think I will go with a 30cm drawer at the bottom. We are big enough for that. Thanks again for the tip, now I still have to find out if you can configure such a cabinet online... Best regards P