Bosch fridge-freezer combination for Ikea Metod cabinet 60x60x220

Well, the heights of the doors are, in my opinion, irrelevant. With the fridge that I installed in a Metod some time ago, there was a kind of "empty shelf" below the freezer compartment and another such empty shelf above the cooling section. The fridge does not stand on the bottom of the cabinet but is installed slightly higher - so that the doors fit properly. If needed, I can also upload a photo of "my work"; however, in that case, I installed the Ikea Rakall fridge. The matching shelves with ventilation are included with the Metod, and if necessary, they can also be purchased separately. The ventilation for the baseboard is also available for separate purchase.

With a fridge-freezer combination, it does matter. Unless you want to, for example, always open the freezer compartment when the fridge compartment is opened.

You just have to make sure that the refrigerator is installed at a height so that one door reaches exactly to the top edge of the freezer door and the other from the bottom edge of the refrigerated compartment door (or vice versa, depending on the arrangement). The small to medium "empty spaces" that result below and above the refrigerator are admittedly unsightly, but there are worse things.

but there are worse things

Not much... Besides, you can't place the combination on a shelf. It is too weak and would need to be supported at least in the middle.

With the Ikea Metod it is specified that way. There is an extra shelf included that is screwed in with rails inside. So far it holds like that