Villeroy and Boch 3.0 washbasin on Ikea Godmorgon

Hello,

We are currently planning our bathroom.
I like the Ikea Godmorgon base cabinet both visually and price-wise.
However, it is somewhat difficult to find a suitable built-in washbasin, as we need one without a tap hole.
I don’t like countertop basins with a wooden board or similar at all.

I have now found the Villeroy & Boch subway 3.0.

Does anyone have experience or know if the washbasin fits on the base cabinet?

From the external dimensions, I think yes (both 80x47 cm), but how it looks underneath worries me.

Thank you very much in advance

We have the Subway 3.0, but in 100cm width and I just installed the base cabinet on Sunday. We chose the original from Villeroy & Boch, which cost a good 700 €, but of course significantly more than the Ikea cabinet. Therefore, just the following note.

There are detailed drawings available for both the Villeroy & Boch cabinet and the basin itself, and you can measure the Ikea cabinet on site since I haven't found any drawings for it. The only problem I see is that with the Ikea cabinet you will probably always have a gap under the basin. The Villeroy & Boch base cabinet has a raised edge on top that runs under the basin. This is a very nice visual solution. For the 80cm base cabinet, this width is 750mm at this point, while the overall dimensions of the cabinet are 772mm. If the Ikea cabinet really measures exactly 80cm, then the base cabinet will sit right on the outer edge, which I fear won't look good.