Tiles with 10mm notching in the thick-bed method?

Hello everyone,

I plan to have parquet (14mm) installed on one side of the living room and tiles (80x80) on the other side. The transition should preferably be without profiles, etc., but there must definitely be no height difference.

So my parquet installer told me he will achieve a height of about 18mm with his adhesive and parquet. Now the task is to bring the tiles, which are 9mm thick, up to 18mm (adhesive 9-10mm). I have already found a product from PCI (Flott), which is supposed to be suitable for large-format and heavy tiles.

Will this work without problems, has anyone had experience with it? Notch 10x10? I don’t feel like using leveling compound.

Thanks.

I don’t know if you can reach the 9mm height with the 10 cm spatula. Best to try it out... In any case, I would recommend super glue. We also installed our 3 cm thick granite slabs using thick-bed mortar; on the stairs, we had to apply up to 30mm of adhesive.

Maybe the Mittelbettverfahren is also an option... Zahnung Halbrund 20/10?!?