DG
2014-10-27 09:39:10
- #1
Hello yakari,
You can get the standard land value and a binding cost estimate from me.
Unfortunately, you will definitely not manage with the costs that mentioned if it is an individual partition.
Basically, your price is reduced by 20% compared to the costs from toxic, but that also depends on the layout, etc. The costs in NRW are based on:
1. Size of the property (you are between 100 and 1000 m²)
2. Standard land value (you are between €80 and €250, there are no cost differences in between)
3. Length of the old boundaries to be examined (depends on the boundary to be newly determined, no one can know without a plan, therefore the costs cannot be determined either)
4. Was the original property built on or undeveloped?! If built on => partition application, which triggers additional costs
5. Additional costs for the takeover at the cadastral office (standard case: 2 x €270 = €540 net only)
For a binding cost estimate, simply send the location designation (district, section, parcel and/or correct address) and mark the new boundary either on the map or in a sketch.
Best regards
Dirk Grafe
You can get the standard land value and a binding cost estimate from me.
Unfortunately, you will definitely not manage with the costs that mentioned if it is an individual partition.
Basically, your price is reduced by 20% compared to the costs from toxic, but that also depends on the layout, etc. The costs in NRW are based on:
1. Size of the property (you are between 100 and 1000 m²)
2. Standard land value (you are between €80 and €250, there are no cost differences in between)
3. Length of the old boundaries to be examined (depends on the boundary to be newly determined, no one can know without a plan, therefore the costs cannot be determined either)
4. Was the original property built on or undeveloped?! If built on => partition application, which triggers additional costs
5. Additional costs for the takeover at the cadastral office (standard case: 2 x €270 = €540 net only)
For a binding cost estimate, simply send the location designation (district, section, parcel and/or correct address) and mark the new boundary either on the map or in a sketch.
Best regards
Dirk Grafe