Problems with BEHJÄLPLIG

  • Erstellt am 2015-05-21 12:22:25

tobias19

2015-05-22 12:54:26
  • #1
The door is perfectly flush, closing wonderfully with the adjacent door both at the top and bottom. The depth also fits perfectly. So I wouldn’t know what I could have installed incorrectly at the bottom. Really strange.
 

IKEA-Experte

2015-05-22 13:26:11
  • #2
Hello, I suspect it is not an XXL appliance as opposed to Jelimi's machine. For a dishwasher with a standard height of about 82 cm, the distance between the pivot point of the dishwasher door and the cabinet door is greater. This also increases the angle of intersection of the planes in which the two doors lie. Consequently, with a dishwasher of standard height, the gap at the top when opening is smaller than with an XXL. However, Behjälplig is also intended for standard dishwashers.
(The sale of BEHJÄLPLIG was certainly not discontinued without reason.)
If I have identified the correct cause, at the moment I see lowering the machine and filling the space between the dishwasher and the countertop with a strip as the only solution.
 

tobias19

2015-05-25 14:32:07
  • #3
Exactly, it is not an XXL appliance. Earlier, as you suggested, I almost fully lowered the dishwasher. And indeed, the scraping on the rail is no longer present. It’s not a nice solution and now Behjälplig makes other strange noises when opening (only in the last 10°-15°). But at least the door now opens and closes without problems. In other kitchens, the front is simply mounted directly onto the door, without a rail system. I guess that’s not possible with an Ikea kitchen because the baseboard is lower than in other kitchens?
 

IKEA-Experte

2015-05-25 15:31:01
  • #4
That is not possible because at 80 cm the front cannot swing far enough under the dishwasher. It should also be possible to raise the lower pivot point of the front when the feet are screwed out, but only to the extent that the front can still swing under the appliance. That would mean setting the axles and brackets 5 cm higher. If I have not thought incorrectly.
 

Sektionschef

2015-05-26 07:59:39
  • #5
Actually, this is a new insight for us:

Behjälplig is not suitable for non-XXL devices!

Until now, I have always assumed that Behjälplig can be used regardless of the dishwasher type.
Best regards
Section Chief
 

Similar topics
20.02.2014Ikea Kitchen Experiences – Your Opinions, Tips, and Recommendations Wanted!21
28.07.2015Attack direction and door position in the bathroom upstairs14
13.01.2025Door House/Garage: Side entrance door as a fire protection door?27
13.10.2017IKEA kitchen quality and experiences?140
11.11.2017Sealing terrace exit / door in double-shell masonry10
15.02.2017Fully integrated dishwasher19
08.02.2024Problem with Hjälpsam dishwasher12
12.09.2019Dishwasher fronts401
19.01.2015IKEA Outstanding Dishwasher Disappointment18
06.09.2014Siemens or Bosch dishwasher combined with Behälping rail14
24.10.2016Ikea Metod + BEHJÄLPLIG + Bosch Grundstück = Problem22
22.11.2016Installing Siemens dishwasher in Ikea Metod kitchen58
26.03.2015XXL dishwasher from Neff12
24.06.2015IKEA METOD kitchen with Siemens dishwasher25
31.10.2015Install Bosch SMV68M90EU dishwasher in Ikea Metod23
07.09.2015Washing machine and dishwasher in Ikea Metod tall cabinet?32
21.09.2016Questions about Bosch SMV GSP in Ikea Metod kitchen unit11
30.10.2020Handleless kitchen front, good and affordable - which manufacturer?63
10.03.2025Close the gap to the wall with a cover on the dishwasher17

Oben