Ikea Metod/Förvara drawer front is too high

Dear Ikea fans, I am usually quite good at assembling Ikea furniture, but I am currently struggling with the drawer of the oven built-in cabinet (Metod / Förvara) [ATTACH alt="metod-foervara-179759-1.JPG" type="full"]26683[/ATTACH] The drawer front is too tall and hits the edge at the top (i.e. under the oven). Did I install the front the wrong way round? How can I remove the front again? With the previous kitchen series this was quite easy. It would be great if someone has an idea what I can do. So that the kitchen can finally be finished! THANKS in advance!

Hello,
you probably overlooked on p. 6 that you have to jump to p. 12.

For disassembly, proceed backwards from p. 20.

I have a similar problem. I assembled the cabinet for the stove (including the drawer rails and the board on which the stove will stand). When I now try to insert the drawer, I always hit the board on which the stove stands.

The stove fits exactly, meaning I cannot mount the board any higher. The drawer rail is at the lowest possible position, so I cannot mount it any lower either.

Does anyone have any ideas on how I can solve this? Should I have inserted the drawer before mounting the board on which the stove stands?

Thanks to you all & have a nice evening,
Katinka

Do you have exactly the cabinet that KatjaM. linked? Can you upload a picture that shows the situation?