Gap in building / Access for surrounding properties / §34 Neighbor development

  • Erstellt am 2020-03-24 11:36:56

11ant

2020-04-07 16:07:33
  • #1

You are welcome to show that - even if it should differ from the attachment "Idea" in post #1
 

PyneBite

2020-04-07 16:38:37
  • #2


Unfortunately, that is relatively difficult because I don't use any program for visualization.

For my MacBook, I couldn't find a 3D program that I could handle intuitively. I drew the floor plan the classic way on paper at 1:50 scale.

But I can gladly reveal a few details from the planning:

- 1.5-story single-family house with gable roof
- Ridge height and knee wall would still have needed to be discussed in detail with the building authority
- Planning and building application by architect
- Awarding of trades done independently (I read some interesting posts that inspired me to do this)
- Solid, monolithic construction, KFW 55
- Upper floor open at the ridge height
- No dormers, bay windows
- Interior 11.5 x 7.5 m plus wall thickness
- Clinker brick + plaster facade
- No floor-to-ceiling windows, 3m lift-and-slide door in the dining area
- Parent area with dressing room, bedroom, and en suite bathroom
- Two large children's rooms and a small children's bathroom
- Straight staircase
- Double carport
- Geothermal heat with ring trench collector (own effort combined with subsidies seems very lucrative)
- Controlled residential ventilation and photovoltaics
- Windows on the south side with extra sound insulation

Of course, I would adopt most parameters for a future house. But every plot has different requirements, so surely one thing or another will be exchanged here.
 

11ant

2020-04-07 16:47:26
  • #3

Wonderful! - That's how you can make an old man happy so easily. Then just take a photo of it
 

PyneBite

2020-04-07 17:09:38
  • #4

I will save that for a house worth quoting - also as a hand-drawn sketch, just for you!

The ground floor was a mirrored (and slightly smaller) version of the Viebrockhaus Edition 480 II.
 

11ant

2020-04-07 17:16:33
  • #5
Just for me sounds good. With gmx (de) behind my member name, you can send me the drawings, I would be happy about that. The comment will of course also be returned in this way.
 

PyneBite

2020-04-07 19:56:20
  • #6


If it gets concrete next time, then gladly!
 

Similar topics
27.02.2015Burglary-proof windows?33
03.06.2014Interior design - windows14
16.01.2018Is an extra charge for colored windows realistic?19
18.06.2014Inspector defect identification, determination of window installation10
18.05.2016Help needed with window arrangement!32
27.05.2015Huge problem with condensation on the window34
20.12.2019Trefz window prices and experiences?14
26.01.2015Window between two rooms13
13.03.2015Opinions on window parapet height sought30
09.04.2015For porthole, special regulations? Window, single-family house 1.5 stories.18
22.04.2015Window, roller shutter, exterior plaster10
28.05.2015Round window - dissatisfied with the interior reveal16
27.05.2015Which roller shutters with a closed window, only glazing?13
15.10.2015Kitchen planning with deep windows43
16.09.2019Windows in new buildings: triple glazing with a green tint?21
26.06.2015Floor plan question, stairs, window, orientation12
07.09.2015Kniestock height 2-story windows eaves side14
24.09.2015Which windows and doors are recommended?21
26.11.2015Floor-level shower with nearby window13
10.11.2015Single-family house floor plan planned, we like the windows43

Oben