Drawer problem in the oven base cabinet

Hey! I have a Metod oven cabinet Ikea built-in oven induction cooktop Ikea solid wood countertop, 2.8cm thick. Since the countertop is not that high, several Ikea kitchen planners said we should use two 10cm fronts instead of the 20cm drawer and accordingly a lower drawer. The setup from bottom to top is: low drawer (10) -> Utrusta ventilated base -> oven -> front as cover (10) -> countertop with induction cooktop. Sounds good, but unfortunately it doesn’t work (for us)! When the oven is fitted upwards on the base, there is about 5mm missing for the drawer. Does anyone have experience with this? It is said to have been sold like this several times... Thanks!

Hello, does the bottom drawer front roughly align at the bottom with the cabinet? If not, the brackets must be mounted incorrectly.

Hello, the drawer front closes well at the bottom of the [Korpus]. Unfortunately, that is not the problem.

If the stove is fitted upwards on the floor,

It should first be fitted downwards, as deep as possible....

That doesn't matter. If it is adjusted to fit at the top, it is missing at the bottom, and if it is adjusted to fit at the bottom, it is not correct at the top.

Is the floor for the oven still covered by the drawer front or can it not be mounted that deep because then the drawer sides would be in the way?