30s or 50s cabinets?

Hello,
I need either a sink cabinet with 50 cm width or a tall cabinet with 30 cm width. But neither of these are available at Ikea. Are there any alternatives?
Thanks for your help

Hello,

1. Plan the kitchen differently,
2. Shorten the cabinet in width (if 45 cm is enough, use the dishwasher front as a door),
3. Let the sink reach into the adjacent cabinet (if available),
4. Do not buy a kitchen from IKEA.

None of these are great solutions, the lack of width is simply shitty.

Hello, in another topic someone faced the same problem and managed with a cut-off door from Faktum, which probably fits exactly the Veddinge front. However, FAKTUM can only be ordered until May.

I would simply shorten a 60 wide carcass to 50 width, install a 40 wide door on one side and cover the other side with a 10 drawer front. The storage space would still be preserved behind it. :) If the hinge side of the door would only make sense the other way around, that should also work if you use the Utrusta corner fitting. :)

you could also shorten a 60cm corpus to 45cm width and use a 45cm dishwasher front as the door, but you have to make the pot holes in the dishwasher front yourself or, for example, have them made by the wood cutting employee at the hardware store for a tip.

Or use such a 45 cm as a waste cabinet with Franke kick-matic (we have that), or with drawers (the last Faktum series (with Blum rails and the dot at the end of the frame) can be converted to 45 cm via eBay and then the fronts can be shortened) - but only inner drawers....

25 cm fronts also exist, they are installed on the corner cabinet.

Regards Kai