KfW 55 + BAFA Funding - Costs and Subsidies

  • Erstellt am 2020-05-18 13:48:15

T_im_Norden

2020-05-18 14:36:28
  • #1
You are welcome to check with the annual performance factor calculator; all HPs that are on the list should also achieve the eligible annual performance factor.
 

Tarnari

2020-05-18 14:38:51
  • #2
Yep, and a large portion of all pumps in the wild don’t actually have this annual performance factor because they are poorly adjusted.
 

T_im_Norden

2020-05-18 14:40:39
  • #3
However, this is not relevant for the Bafa because:
What happens if the calculated annual performance factor in the funding application deviates from the measured annual performance factor?
For subsidized heat pump systems in new buildings, a quality check of the system must be carried out after one year of operation. In this process, the calculated annual performance factor in the funding application must be compared with the actually achieved annual performance factor in real operation.

However, besides the quality of the system, user behavior also plays a significant role in the actual annual performance factor. This can only be considered to a limited extent during the determination of the calculated annual performance factor. Deviations are therefore quite normal. The granted subsidy will not be reclaimed afterwards.
 

Tarnari

2020-05-18 14:45:12
  • #4

Fine, I hadn’t considered that. Even better! Nevertheless, it is of course desirable to achieve or even exceed this value.
 

T_im_Norden

2020-05-18 14:45:17
  • #5
Yes, this is the new Monoblock from Wolf, if you take it together with a [Kontrollierte-Wohnraumlüftung] from them, the [Kontrollierte-Wohnraumlüftung] can even be subsidized because there is a joint control system. This also works with heat pumps from other manufacturers.
 

T_im_Norden

2020-05-18 14:47:04
  • #6
Of course, you want to achieve the value yourself in order to save

The annual performance factor already helps with that, the supply temperature of the underfloor heating must then really be as specified there.
 

Similar topics
01.03.2017Controlled residential ventilation - Yes or No?!31
07.10.2016Which heating is recommended for KfW 55?58
28.10.201236 cm Ytong exterior wall, solid construction, mold formation, insulation37
06.12.2015Heat pump / final energy demand / annual performance factor20
17.12.2015Is T8 Poroton only significantly better than T12 in heating costs?14
18.10.2016Which heat pump? Ventilation system / Air-to-water heat pump93
03.04.2018New building KfW55 with gas, solar, and controlled residential ventilation with heat recovery43
03.04.2018Building a single-family house in NRW103
08.02.2018Household electricity consumption - consumption values for comparison41
06.06.2018Air heat pump in combination with water-carrying fireplace18
13.06.2018Energy consultant for a KfW 70 house costs 2,500€?29
04.02.2019What energy costs do you have (electricity/gas/alternative heat source)?22
24.01.2020Annual performance factor calculation for funding (parameters and calculation tool)29
01.12.2020Eligible costs for heat pump134
25.10.2020KfW 55 or 40+ for new single-family house construction in Würzburg?27
18.04.2021KfW 55 - Ventilation system yes/no? - Experiences222
25.07.2020New single-family house with liquefied petroleum gas - also possible without photovoltaics or solar?24
13.01.2021Comparison of geothermal heat pump with LWW pump86
14.02.2024Bafa funding for heat pumps will be discontinued as of 31.12.2020.508

Oben