Ikea Faktum kitchen door 60x125 does not fit...

Hello,

I have just installed the refrigerator in my new Ikea kitchen and am still looking for the reason why the kitchen front door 60x125 sits about 1cm too low? Does anyone have an idea where I screwed something together wrong?

I have a Faktum tall cabinet 60x217. At the bottom is the 122cm refrigerator behind the 60x125 door; above it is a normal cabinet with a 60x92 door. The upper door fits perfectly on the carcass. However, the 60x125 door for the lower area sits about 1 cm lower, so now there is about a 1cm gap between the two doors and the door protrudes over the carcass at the bottom. Before I start drilling new holes for the door hinges, I would rather understand and correct my assembly error.

Thanks,

Stefan

Turn the door 180°, hold it in place, and see if the mounting plates can then be fitted in a suitable position. If you have already drilled holes for the handle, you can of course save yourself the trouble. Then rather drill new holes in the body.

Turn the door 180°, hold it in place, and see if the mounting plates can then be fitted in a suitable position. If you have already drilled holes for the handle, you can of course save yourself the trouble. Then it’s better to drill new holes in the carcass right away.

Hello IKEA expert,

turning it 180° was the saving grace. I haven’t attached the handles yet, that will happen tomorrow. Today I finally managed the technical go-live (installed, connected, and tested all devices) and fitted the last doors and drawers.

Thanks for the help,

Stefan