MundS
2017-08-18 16:44:43
- #1
...real RC2 requires manufacturing according to the manufacturer's specifications and installation into suitable substructures.
The glazing must then necessarily be P4A, which is a laminated safety glass made of 2x 4mm float glass with 4 films of 0.38mm in between.
Depending on the manufacturer, the glass panes must be bonded or additional components must be installed to prevent the outer glass stop from resting on it.
In addition, a lockable handle and additional locking devices according to approval are required.
If all of this is complied with, we attach a plaque in the rebate and provide the builder with the technical documentation.
RC2 means at least one hour more work per sash plus the more expensive installation due to more fixing points and the significantly heavier glass.
Additionally, there is the extra effort in documentation.
The glazing must then necessarily be P4A, which is a laminated safety glass made of 2x 4mm float glass with 4 films of 0.38mm in between.
Depending on the manufacturer, the glass panes must be bonded or additional components must be installed to prevent the outer glass stop from resting on it.
In addition, a lockable handle and additional locking devices according to approval are required.
If all of this is complied with, we attach a plaque in the rebate and provide the builder with the technical documentation.
RC2 means at least one hour more work per sash plus the more expensive installation due to more fixing points and the significantly heavier glass.
Additionally, there is the extra effort in documentation.