M. Gerd
2021-01-20 10:49:04
- #1
For your information: I lowered the heating curve by 1 degree 72 hours ago. The consumption then dropped to 20kWh per day (only heating; TWE remained the same at 2-3kWh). The operating hours fell from ~17h to ~12h per day. If I now account for the system consuming about 200 watts more than it indicates, approximately 2kWh are added to the 20kWh. I suspect that the 20kWh refers to the pure compressor power input and the 200 watts are used for control etc. The temperature increased on average by roughly 1.5°C during this period.
In short
- Target flow temperature lowered from ~30°C to ~29°C
- Outside temperature on average 1.5°C warmer
- Consumption for heating dropped from 30kWh to 20kWh
Thanks! At the beginning of the thread, I wasn't sure if the values were good or bad. I’m relieved that the values are good and very satisfied that they are even TOP values.
If anyone wants more statistics, just say so.
In short
- Target flow temperature lowered from ~30°C to ~29°C
- Outside temperature on average 1.5°C warmer
- Consumption for heating dropped from 30kWh to 20kWh
das sind top Werte! :)
Thanks! At the beginning of the thread, I wasn't sure if the values were good or bad. I’m relieved that the values are good and very satisfied that they are even TOP values.
If anyone wants more statistics, just say so.