45cm dishwasher front dimensions / bypass 20cm grid

Hi,

I am new here in the forum and would like to ask my first question.

But before I do that, a little background. We have an old Faktum kitchen that has accompanied us for many years and has been remodeled from time to time. Since the old Nexus fronts are no longer available, we have decided to completely redo the kitchen.

We have looked at all kinds of options and ended up going back to Ikea.

If only it weren’t for that stupid 20cm grid...

Now I came across the 45cm front (802.915.52) and thought I could build a cabinet around it (or adjust it). (The previous plan was to plan 25cm cabinets based on the corner cabinet doors)

But, at Ikea, the dimensions are listed as:
Width: 45 cm
Height: 2 cm
Length: 90 cm

Aren't the base cabinets normally 80cm high? Is that just the packaging dimension, but not the front dimension?

Is this actually a self-service item or a stock item? (With self-service I could just stop by briefly and measure).

Regards, Kai

Hello,
these are the packaging dimensions. The front is of course 80 cm high. If no shelf and compartment are specified in the availability query below, it goes through the goods issue.

Thank you, then we are getting closer to our kitchen - now we have 25 and 45 options.

best regards kai

By the way, you can quite easily narrow a Maximera drawer with the Blum back panel holders (e.g. Z30B000SL). This also saves having to drill pot holes in the front.

Edit: Unfortunately, this statement was incorrect. What was still possible with the RATIONELL drawers from Blum no longer works with MAXIMERA.

Thank you for the tip about the back panel bracket.

Unfortunately, with the Bodbyn fronts, I cannot install a drawer vertically (I had already considered that) because the profile would then be rotated by 90°.

Regards, Kai

How should a drawer installed vertically even hold, and what does one do with a drawer mounted in such a way?