Manufacturer of sliding gates (driveway gate, yard gate) wanted

  • Erstellt am 2021-10-12 20:00:23

barfly666

2021-10-13 00:33:47
  • #1
I'll throw CAME FROG24 into the ring for, for example, 2 swing gates (I would advise against a sliding gate, it looks like a commercial or prison gate). The manufacturer can certainly name cooperation partners on request (from my own experience, however, these call out prices beyond good and evil).

If you have it done, it will definitely be around 10,000€. With a bit of own effort and a good locksmith who makes the gate for you, you will certainly be able to save (Came controls are also offered in sets, about 2000€, then another 2000-3000€ for the gate from the locksmith).

Search for Elektro Hückmann or Came Hofuhr, he sells the controls and is extremely helpful and gives great phone support, possibly he can give you a tip for an all-in-one craftsman in your area.

Google search for "elektrische Tore" also yields many hits (Polish manufacturers).

By the way, I myself have a Came control with underfloor motors and two swing doors. Thanks to slimy worm gears, I had to get intensively involved in the installation and replace 2 circuit boards costing 300€ each within a year. My mistake, the previous owner had it installed sloppily (the supply lines to the control box were open and the box was mounted too low) and I underestimated the short-circuit worms. Otherwise very satisfied and the foot traffic can be let in through the pedestrian gate.
 

rick2018

2021-10-13 05:19:52
  • #2
If glazed on both sides with good drive, etc., you will end up at just under 10k including installation.
 

Dany250

2021-10-13 07:37:09
  • #3

I will definitely look into this, it’s just a bit more difficult because I’m new in town and don’t know anyone...

And :
Thank you too for your ideas! I will definitely start here when the time comes, sounds great!

Thank you all for the great help!!
 

Nida35a

2021-10-13 09:19:09
  • #4
Go for a walk and take a look at the neighborhood.
Our sliding gate includes the wicket gate,
either everything opens electrically, or only the wicket gate for pedestrians.
Someone from the neighborhood had that and, upon inquiry, also had the contact to the metalworking shop/locksmith around the corner (3km), in case something gets stuck or broken.
12.5m fence with base, 3.5m gate,
including disassembly, base, installation, 2020 12 T€, Berlin
 

AllThumbs

2021-10-13 10:07:14
  • #5

Do you perhaps have a photo of it and could send me the contact details of the company via private message? That would also be interesting for us next year in Berlin.
 

Nida35a

2021-10-13 11:48:13
  • #6

PM sent, with pictures,
and some filler characters from the rabble for the authorities
 

Similar topics
26.09.2012Material mix without basement, plinth, moisture-resistant fabric insulation19
26.03.2016Garage base draws water - defect?28
17.01.2021Installation of a satellite system38
28.01.2014Base of the refrigerator and countertop above the refrigerator19
12.10.2017Installation of satellite dish on the roof61
29.09.2017What height should the visible plinth on the house have?13
25.04.2018Interior finishing by self-work (electrical installation) feasible?12
17.06.2020Guest toilet: base made of floor tiles or rather wall tiles?16
21.08.2020How to clad a projecting plinth (facade-basement wall)24
31.08.2020Do you need a base for the washing machine?20
04.01.2021Installation, setting up IoBroker - still "configurable" at an old age?20
26.02.2021(Rising?) Moisture Base / Exterior Wall11
29.06.2021Electrical Installation New Single-Family House - Evaluation and Suggestions29
11.01.2022Tiles in the living area - baseboards made of tiles or wood?26
18.06.2023Height of the base of the outdoor unit heat pump10

Oben