Hello everyone! You have several options: 1.) buy another one, then you have a great sliding door wardrobe with a total width of 150 cm. (Sliding doors must be purchased separately) 2.) buy 2 hinged doors with a width of 40 cm, have them cut to about 37.2 cm width at the hardware store, and glue the cut edges with an edge bander. (rather pointless since the fronts are usually more expensive than the carcass) 3.) have the horizontal shelves of the wardrobe cut to (60-1.8-1.8 or 50-1.8-1.8) so 56.4 cm or 46.4 cm and have a wardrobe with a width of 60 cm (Faktum fronts) or 50 cm width (PAX fronts). Where you have the cut, you have to use, for example, corner connectors because the standard Ikea assembly recesses were cut off. Likewise the PAX back panel. 4.) Curtain 5.) Return it. Tough choice - write what you decided! Regards