Help! Is this the current state of technology???

I would offer him that he may publish these pictures as a reference on his website :rolleyes:

It doesn't look good... But whether he has to fix it is a completely different question.

Hello Gerit,

judging this based on your pictures is difficult; the camera angle "can" be misleading.

So, at first glance, I would suspect that the tiler has not delivered his masterpiece in some places and will need to do some touch-ups. Overall, however, all work should be within acceptable tolerances.


Bauexperte von unterwegs

The close-up of the joint of the edge is of course terrible, but with normal spacing it will not be as noticeable. I’ll give you a tip for the small holes in the grouting: just touch them up with some plaster on your finger so that the holes are filled. This also works with the joint of the edges.

Is it normal to install the finishing strips like this at a 90-degree inside corner? He also installed end caps and outside corner connectors. Shouldn't inside corner connectors be installed as well??? Or can the tiler do whatever he feels like?

You gave yourself the answer with your last sentence. As long as you have not explicitly agreed on something like how an inside corner should look, the flisö can and may do it as they see fit...