Determine the position of the floor transition profile based on frame dimensions

Hello everyone,

in the next few weeks we want to lay flooring and install doors / frames (in this order). The doors have been ordered but not yet delivered.

Now we are wondering at which point we need to install the floor transition profile so that it later sits exactly under the door leaf.

Can this be calculated based on the door / frame dimensions? So I would need to know how far the future center of the door leaf will be from the wall.

It is the door Mosel Cala 01.

Attached is the data sheet from the website.

Maybe someone is familiar with this.

Regards Simon

Now we ask ourselves at which point we have to install the floor transition profile so that it is later exactly under the door leaf.

Place it (if necessary at all) in the extension of the walls. This line is under the door leaf.

As I said, I don't understand what you even want with a profile?

The expansion joint in the screed dictates that, doesn’t it? That’s why you need the profile. Or you just fill the joint with something. There are joint filling compounds made of cork. Silicone would probably be the most unsightly choice...

The expansion joint in the screed dictates that, doesn't it?

Depending on the room size, no one cares about the joint with glued coverings. We also don't know which coverings are involved. And another question: glued or floating installation?

That's why you need the profile.

What kind of profile? There are dozens of variants. Same covering height or different heights? Different materials? That's why the question to the OP.

Something like this is (visually) not acceptable at all:


This would be better:


Or simply like this with cork:


There are many more possibilities.

It is about floating parquet installation.
Parquet to parquet or parquet to tiles.

Actually, what is shown in the first picture was the plan.

Go back 1 cm where the door will later be hung, that usually fits.