Stair area 3.04m x 2.25m - 15 or 16 steps

Here from the post "Grundriss Planung unbedingt vor Beitrag Erstellung lesen".

Yes, I’m telling you: the report from me, the stairs in minimum dimensions for ceiling height 2.80 from Kerstin

Stairs are planned individually. Whether 15 or 16... personally, I would probably take 16.

If I recalculate the planned staircase, I come to 16 steps (0.1825 m / 0.255 m) The tread is not exactly generous. Rather too small. You need 3.16 m length of the staircase. Or you make 15 mm Übertritt per step. Which, however, does not make for a very comfortable descent.

How do you recalculate? Via Treppenportal Germany?

In Kerstin's example you have 3.375m for the stair flight at the exit. Can you also realize that above? The nice thing about a staircase is that you can easily recalculate it. I always draw a sketch for that – can recommend it.

In Kerstin's example, you have 3.375m for the stair run at the exit. Can you also realize that at the top?

Unfortunately not. At the top, the door frame of the bathroom actually comes right away. Maybe 2 to 4 cm distance to the stair opening.

What do you think of the following idea?

- 17 steps
- landing depth slightly smaller at 90cm
- instead, tread depth 26.75cm
- riser height 17.18cm

90 cm? ... Then there will be a railing added .. and then you should check what else you can get up the stairs.

And, in my opinion, the landing depth should correspond to the tread width of the staircase.

I somehow see a floor height of 298 cm for you.

And these are not steps, but risers, which are normally specified. Therefore 298/16 risers .. would be a riser height of 18.625 cm. And it should not be more than that. The last sample already had 17 risers.

However, I find a tread depth of 26.75 cm to be the lower limit.

It is best to go up and down various stairs in different places, and for those where you feel comfortable, simply measure the riser height and tread depth. Then you can better visualize it.