Induction cooktop in Ikea Faktum PROBLEM?

Hello,

have you already looked at the installation manual (pdf download under "additional documents" on the Neff page, abbreviation II)? It nicely explains the different possibilities for ensuring ventilation (point 3).
Regards,
IKEA friend

PS: You of course mean mm, not cm ...

Hi,

yes, of course.. I mean mm and not cm.
Thanks for the hint, I'll take a look there.

3C is what you want to do.

So, I believe the problem can be solved most easily as follows:

I have to have the worktop for the additionally purchased 80 cm wide base cabinet custom-made anyway, because it is not available in the reorder service from Faktum.
The rest, meaning the FAKTUM worktop, is 62 cm deep.
I will have a 64 cm deep worktop made for the base cabinet. Then there is the 2 cm gap between the wall and the back of the base cabinet.
The height of the new worktop will not be 3.8 cm, but 5 cm.
Next problem: none.
I can only find worktops that are 3.8 cm high.
Solution: leave out the drawer? Can the drawer front be attached without the drawer?
Underneath are 2 deeper drawers. Those are enough for me.
4.5 cm must be cut off horizontally from the back panel.
But how will the frame hold then?????

Sorry, but it can’t be that the base cabinet for an induction cooktop always has to be custom-made.
I will soon just put 2 hotplates there, plug them in, and that’s it.

Saw out the 2 cm at the bottom and that’s fine.

We ourselves are anyway unskilled when it comes to crafts. Can't even cut a sheet of paper straight with scissors. I will take the assembled corpus together with the drawing to the carpenter, who is supposed to cut out everything necessary for me and make the worktop...