Indirect lighting with wooden strip

Good day

I would very much like to equip several rooms with indirect LED lighting.
I thought about attaching a strip about 10cm below the ceiling.
The LED strip will be placed in this strip.
Attached is a picture of how I roughly imagine it.

The transformer should also be hidden on the board.
Where there is a window, I would also need the strip as a curtain rail.
Has anyone already implemented something like this?
What do I need to pay attention to and how can I attach the strip?

eine Liste

A list? Cunning... ;)

Im Anhang ein Bild,

Unfortunately, that is missing. Therefore, there is also (still) no answer.

Sorry, it is probably called [Leiste].
And here is the picture

Hi,

I implemented it exactly like this. For the mounting, I used the Vidga wall hooks and rail from ikea. On the board at the back, I screwed an aluminum profile, which was then attached to the Ikea hooks. The cob led strip is also mounted on this aluminum profile.

Power supply either behind the board or on top of the curtain rails, it's best to use a dimmable one right away.

Hi,

I implemented it exactly like that. For the mounting, I used the Vidga wall hooks and rail from IKEA. On the back of the board, I screwed on an aluminum profile, which was then attached to the IKEA hooks again. The COB LED strip is also on this aluminum profile.

The power supply is either behind the board or on top of the curtain rails, preferably take a dimmable one right away.

Looks nice. I want to use them as lighting for almost all rooms. Are there possibly any solutions where the strip/board is a bit thinner?

I believe there is no off-the-shelf glue anyway, so you can saw the strips as thin or thick as you want