IKEA METOD doors with old 2007 BILLY shelves?

  • Erstellt am 2016-04-25 18:17:11

IKEA-Experte

2016-04-25 18:17:11
  • #1
Hello, if I remember correctly, then Billy does not have continuous rows of holes. Therefore, the first question is whether you are willing to drill holes for the hinges into the BILLY.
 

Trulla

2016-04-30 13:59:04
  • #2
Hello! Didn’t get around to replying here earlier, a lot of stress. But now.
So, the holes go all the way through, there is a solid bottom in the middle. It is a single row of holes with 2.6 cm spacing between holes and 3.5 cm distance from the shelf edge.

Can you actually use hinges other than Ikea’s for the Metod cabinets? I have 34 cm wide drawer boxes (kind of like MOPPE) that I would like to put in a 40 cm wide cabinet, the inside width is 36.4 cm. Would, for example, this one work:

 

IKEA-Experte

2016-04-30 18:59:44
  • #3
I assume the distances were measured from the edge of the hole, then it is the usual 32 mm hole spacing. For a door 8 cm high, the cup holes or the hinges have a distance of 700 mm from each other. 22 hole spacings correspond to 704 mm. If you fully extend the height adjustment of the mounting plate, you reach 704 mm. However, there must be no deviation. For the door and the Utrusta hinges, the mounting plates 174H7100E from Blum are necessary. If the lower two holes of the shelf are used, the lower edge of the door is about 5 cm lower than the middle between the two holes.
 

Trulla

2016-04-30 19:29:13
  • #4
Ok, thanks! Yes, I did not measure from the hole centers, I thought I wouldn't get it exactly right, so I measured from the hole edges. And how does it work now with this hinge for METOD? Does it fit the METOD holes or is IKEA doing its own thing just like with the strange 20 mm grid?
 

IKEA-Experte

2016-04-30 19:37:25
  • #5
The hinge does not fit. With the normal UTRUSTA hinge, there should still be 34 cm of space for the box.
 

Trulla

2016-04-30 20:40:42
  • #6
So the METOD drillings are actually different.

You probably mean "still space at 34 cm," right?
Then you probably mean this UTRUSTA hinge:

I've only just seen it now!

Next Friday I finally have time to go to IKEA, I hope. Then I will measure all sorts of things, etc., and pepper the salespeople with questions!

Thank you for your help and I wish you a nice Sunday!
 

Similar topics
20.02.2014IKEA kitchens - quality, price, and experiences?27
13.10.2017IKEA kitchen quality and experiences?140
13.12.2010Ikea Avsik, Faktum wall cabinet / Horizontal display cabinet door assembly20
20.08.2015Storage shelf with door and drawer Inreda/IKEA, need help11
27.02.2017Ikea Metod rail installation mounting tips17
09.01.2017IKEA is increasingly becoming a knick-knack shop12
07.11.2014Is a new Ikea kitchen system coming?31
03.08.2016IKEA KNOXHULT new in the assortment - FYNDIG discontinued14
09.04.2014Difference between Ikea Faktum & Ikea Metod kitchen16
20.01.2014Ikea Udden and Faktum combine12
18.05.2015Ikea Metod/corner upper cabinet, why no 30/50 grid?11
21.05.2015Delivery difficulties Metod IKEA18
15.11.2014Front for sink/waste combo10
24.10.2016Ikea Metod + BEHJÄLPLIG + Bosch Grundstück = Problem22
18.10.2015First Ikea kitchen... Now with backsplash (p. 7)61
10.05.2015IKEA METOD search internal dimensions, side wall thickness?25
09.07.2015Built-in refrigerator-freezer combo with fixed door at IKEA METOD10
19.04.2016Equip Ikea Kallax with shelves12
13.01.2020IKEA Vaglig and Cleaning Dishwasher Door Rail10
02.06.2025Experiences with IKEA kitchens – quality, assembly, service?37

Oben