Gong with central radio control

Hello everyone,

there are quite a few gong systems on the market, but somehow I can't find the right one for me. In my sub-distribution board, I have a relay that is supposed to switch the gong, but I want to connect a radio module here and position the gong freely in the house. So far, I only find solutions where I have to install a gong in the UV and it then wirelessly connects the others. But it must be possible to do it differently, right? Does anyone know something?

so long...

Hmm, I don't quite understand the problem. You currently have a doorbell with a chime that is hardwired? Now it should be expanded with a chime? Here are a few ideas. Just use Google.

26663 metzler

klingelsignal weiterleitung funk

An example directly on Amazon

Türklingel Signal Weiterleitungs System Klingelton weiterleiten Türklingelsignal per Funk übertragen Gongsignal weiterleiten KOMPLETT SET

So far it is not yet installed and I currently only need an interim solution that works. Currently, there is a Gira TKS and a Gira 128900 REG door communication switch actuator is connected to it. I now want to control some chimes in the house through it, where there is partially no wiring, hence wireless. I have so far looked for wireless chimes and you always find complete sets with a doorbell for the outdoor area, but I want to control it via a switch actuator. However, the system you mentioned could be an alternative, namely the MT3.0 and the MP3 wireless chime.

Possibly via smart speakers? But I don’t know what Gira allows there. With the TKS, it now also works on handsets with the appropriate device.

Yes, that is the goal. I want to do it via smart speakers, phone, and PC, but until that works and also possibly for safety, I want to have a "classic" system. The Metzler solution seems to be usable. Version 2 should have enough range. I’ll test it.