Fixing the Ikea Pax wardrobe to the wall. How?

Hello,

I have a 2m Pax with glass sliding doors. Since I live in an old building and the floors are not very even, I would like to fix it to the wall.
I see two possibilities:

1. Bracket on top or on the side
2. Fix it from the back through the hole. But how is that supposed to work? The holes on the top right and left are huge. How do you proceed?

Thanks in advance!

Hello,

the information about the "large holes" is actually nicely explained in the manual, for example on p. 28.

Together with the included "keyhole plates" and suitable screws and wall plugs (not supplied), the steel brackets located in front of the large holes in the back panel form the wall mounting.

The same system is used, for example, with Faktum wall cabinets to hang the cabinet on the wall – so it is quite stable if appropriate screws/plugs for the wall are used.

Good luck,
IKEA-Friend

We like to use the supplied packaging material (Styrofoam) as spacers from the wall when using baseboards that are too thick; this prevents the cabinet from being pulled too far back.