First draft single-family house 160m2 - Please provide feedback

I would make the access to the dressing room through the hallway, and are you sure that the study should remain half open like that?

would make the access to the dressing room through the hallway, and are you sure that the office should remain half open like that?

That is actually still under discussion.

No, a sliding door will be installed there later. It is currently not yet drawn in.

The point of the dressing room is that you don't have to go through the bedroom twice and potentially wake your partner, which you actually want to avoid with such a dressing room. In addition, the closets can be arranged as a "two-liner" without a corner (which I find very impractical), and the room could then also be a bit narrower (2x60cm for closets plus 140cm (or even 120cm) in the middle makes 2.6m, which I would really consider sufficient). The 38cm can be added to the children's room as a nice niche for shelves or a wardrobe if 120cm in the "dressing room middle" is enough.

... there is still a sloping roof, so the use of space in the dressing room is probably better as it is now.

, scroll back: Your suggestion (#27, but also #25) pushes the walls exactly back into the (now improved) old state.

Are there any comments on the current window configuration (the door in the north exterior view is obviously drawn incorrectly)?

Do you consider a roof pitch of 38 degrees with a knee wall height of 1.13m to be sufficient? I am 1.93m tall and would like the roof slopes to be as high as possible. So far, we have seen 45 degrees at 1.10m. That would definitely be sufficient. However, the additional cost for a 45-degree roof pitch is too high for us. Alternatively, we can increase the knee wall to 1.37m and keep the roof pitch at 38 degrees.