Example cold water tap for guest WC

Hello everyone, we recently had the sampling for our bathrooms, but I'm still not quite convinced by the selected cold water tap. I find it difficult that only cold water comes from the tap and most fittings are designed for cold + hot after all. Does anyone have a nice cold water tap installed and can give an example? Unfortunately, I haven't found much on this.... Thanks

Hello

With a T-piece, hot and cold water can be connected to the faucet and attached to the angle valve.
Then choosing the faucet is no longer a problem.

Olli

Why should one install only a cold water tap? I find it totally unpleasant to have only cold water available for washing.

: It is a prefabricated house from the late 1970s. Currently, only cold water is installed for the guest WC, I don’t find it that problematic since the guest WC is not used very often and personally, I don’t mind washing my hands with cold water. These are just the conditions on site.

: I have also heard of this possibility, but I don’t find it ideal if it is "pretended" that there is warm water but then nothing comes out. That’s why I am specifically looking for a cold water faucet. But keep that in mind.

Without a hot water pipe, no hot water and therefore no cold/hot water tap necessary, right?

Although it only has something to do with your question on the side, why do you want only cold water in the guest bathroom in 2020? That's not something you can fix again without further effort, except with a hot water mixer.

I find that very unpleasant. Above all, it is mostly used by you, not by the guests.

EDiT: Just read above why!

... or you install a mini instantaneous water heater under the sink and can then wash your hands "normally."