blockhauspower
2015-03-04 16:52:49
- #1
We do not have and do not want a [Dachflächenfenster].
Because many builders, buyers, and architects initially imagine floor-to-ceiling windows as great, spacious, and luxurious, and then at some point realize that they don’t actually want every passerby (or, from a certain age, even the parents in the garden) to be able to look under the coffee table or onto the laundry pile, or that they want to push the desk in front of the window after all. When I generally look at houses with floor-to-ceiling windows, at least half are taped up or covered at the bottom. Of course, it may often be the case that the builder no longer lives there themselves.Why?
When I look at houses with floor-to-ceiling windows in general, at least half of the lower part is either covered with tape or draped.
In the best case, the transmission rate is still 50%, but often significantly less. If the light really needs to come through, you can install structured glass from the start (although it doesn't look really great) or stick a micro-lens array on it (no idea if those are commercially available in that size). To be nitpicky: the floors are usually darker than the walls, and daylight comes from (an angle) above (except earlier in winter when there was still snow). Therefore, the brightening inside the room through the lower part of the window is less than through the upper part of the window.But that doesn't change the required glazing area, does it? By the way, pleated blinds are usually installed as shading from the inside or a film that resembles frosted glass from the outside. It is definitely bright enough with film; pleated blinds can be removed if needed
Similar topics | ||
13.08.2016 | Pleated curtain - Poor workmanship or normal? | 10 |
02.10.2019 | Base plate - film against rising moisture | 15 |